- OMV 6.x
- Nefertiti
- 8. Januar 2022
1. offizieller Beitrag
- 8. Januar 2022
I am getting this message in the ui left button clear it, but still coming back even after reboot?
Code
Software Failure. Press left mouse button to continue.Obsolete cached data found. Page will be reloaded.
Nefertiti
Hat den Titel des Themas von „Software Failure. Obsolete cached“ zu „Software Failure. Obsolete cached data“ geändert.
- 8. Januar 2022
Update
from an incognito page I do not get this issue, I guess I have to clear the browser cache
...................
Actually did not do anything the issue resolved itself
- 8. Januar 2022
- Offizieller Beitrag
Interesting... don't think I've saw that one. The error message would have been pretty clear on the cache issue though.
Most browsers, rather than clearing your cache... Go to the sign on screen, Hold Cntrl and click F5 or R, and it will clear the cache for just that domain (Presumably your OMV domain)... and reload it... and won't effect your other sites.
- 8. Januar 2022
- Offizieller Beitrag
I just dealt with the same issue on Firefox. You have to delete cached data AND
cookiesfor the website. To avoid clearing site data for all sites, I cleared cookies and cached data for OMV by IP address. Firefox allows that.
Without clearing everything, I'm not sure how to selectively clear site data and cookies with Edge or Explorer.
- 8. Januar 2022
- Offizieller Beitrag
I've seen the same behaviour on the VM usually after an update, but the odd behaviour is only related to either one or two of the left hand menu listings, , either clearing the cache, reloading the the page or a reboot can resolve it and that's on chrome. It's odd as I've not seen it before.
- 8. Januar 2022
- Offizieller Beitrag
Zitat von geaves
I've seen the same behaviour on the VM usually after an update, but the odd behaviour is only related to either one or two of the left hand menu listings, , either clearing the cache, reloading the the page or a reboot can resolve it and that's on chrome. It's odd as I've not seen it before.
I was trying to figure out why I didn't have this problem in my testing.. and now I'm pretty sure it's because I run FF in Privacy mode while using my OMV 6 install.
- 8. Januar 2022
- Offizieller Beitrag
Zitat von KM0201
and now I'm pretty sure it's because I run FF in Privacy mode while using my OMV 6 install.
Could be, as I use Chrome I'll try the incongnito window, I wonder if it's an extension in Chrome that's causing it
- 8. Januar 2022
- Offizieller Beitrag
Zitat von geaves
reloading the the page or a reboot can resolve it
Before going any farther, I tried a reboot. It didn't work in my case.
If it happens again, I'll see if it can be isolated to cookies only. In my case, purging site data wasn't enough.
- 8. Januar 2022
- Offizieller Beitrag
Zitat von crashtest
Before going any farther, I tried a reboot. It didn't work in my case.
On the last update it didn't work for me either, I've since shut the vm down, as I'm going to re organise my man cave, have some new 24" monitors
and I need to move the wall brackets for them, so I've got some under desk PC mounts for the server and workstation.
- 8. Januar 2022
- Offizieller Beitrag
Zitat von KM0201
I'm pretty sure it's because I run FF in Privacy mode
That would explain it. No site data OR cookies are stored, when the app is closed. Obsolete cache data wouldn't enter the picture.
________________________________________________________________________________
Zitat von geaves
have some new 24" monitors 8) and I need to move the wall brackets for them,
Eight? Are they to be mounted edge to edge?
I bought a 32" high res flat screen TV, for use as a monitor. I have yet to use it because of it's bulk on a small desk. Thinking about it, using an articulating wall mount might be the answer.
- 8. Januar 2022
- Offizieller Beitrag
Zitat von crashtest
Eight? Are they to be mounted edge to edge
haha, no 2, a local office was closing down due to working from home, got 3 for price of 2, brand new still sealed in box, I've got 2 and Suzi has the other one connected to her laptop.
- 8. Januar 2022
- Offizieller Beitrag
Well, started the vm and it's all fine
- 10. Januar 2022
I'm facing the same issue now but only on the Laptop (MS Edge 97.0.1072.55 (Compilação oficial) (64 bits)
Access is beeing done via secured SWAG. (Can't test it locally ATM. Later I'll wireguard to it and see if it happens locally also).
Funny as it is, access via my phone on Chrome 97.0.4692.70 (also secured SWAG) everything is working as it should.
Go figure...
[EDIT]
After rebooting, the cache issue was gone.
[/EDIT]
- 12. Januar 2022
Before see this issue on UI in browser I saw these errors (I updated from terminal by command apt-get update && apt-get dist-upgrade -y)
Code
Setting up openmediavault (6.0.8-1) ...Creating configuration database ...Migrating configuration database ... Running migration conf_6.0.7INFO: The node 'homesrecyclebin' already exists at XPath '/config/services/smb'.Setting up Salt environment ...[ERROR ] Command '/usr/bin/patch' failed with return code: 1[ERROR ] stdout: patching file /tmp/__salt.tmp.1q6dthhl (read from /lib/python3/dist-packages/salt/modules/network.py)Reversed (or previously applied) patch detected! Skipping patch.1 out of 1 hunk ignored -- saving rejects to file /tmp/__salt.tmp.4wzef6pk[ERROR ] retcode: 1[ERROR ] Command '/usr/bin/patch' failed with return code: 1[ERROR ] stdout: patching file /tmp/__salt.tmp.pzql00i4 (read from /lib/python3/dist-packages/salt/fileserver/roots.py)Reversed (or previously applied) patch detected! Skipping patch.1 out of 1 hunk ignored -- saving rejects to file /tmp/__salt.tmp.8r1p6040[ERROR ] retcode: 1Processing system modifications ...Processing triggers for rsyslog (8.2102.0-2) ...Processing triggers for openmediavault (6.0.8-1) ...Restarting engine daemon ...Updating workbench configuration files ...
Alles anzeigen
- 13. Januar 2022
Zitat von d13m
Reversed (or previously applied) patch detected! Skipping patch.
Those errors are normal and happen everytime you update since 6.0.1 or 2 (don't remember right).
- 5. Januar 2023
Today I faced the same problem and this solved my problem. Thanks!
But I think it would be good to add that tip to error message - it will save A LOT of time, if someone faces this issue.
Zitat von KM0201
Interesting... don't think I've saw that one. The error message would have been pretty clear on the cache issue though.
Most browsers, rather than clearing your cache... Go to the sign on screen, Hold Cntrl and click F5 or R, and it will clear the cache for just that domain (Presumably your OMV domain)... and reload it... and won't effect your other sites.
- 6. Januar 2023
Zitat von roko772
But I think it would be good to add that tip to error message - it will save A LOT of time, if someone faces this issue.
Maybe people need to look better and read the pinned info:
Solution #1 to common problems:
Solutions to common problems - General - openmediavault
- 6. Januar 2023
Zitat von Soma
Maybe people need to look better and read the pinned info:
Solution #1 to common problems:
Solutions to common problems - General - openmediavault
As a mechanical engineer with not-so-long experience I know, what people can do if something goes wrong. Common and ordinary problems can turn in their minds into total-fatal-unsolvable disaster.
Secondly, as I say - if I liked searching, I would become a dosimetrist. Why? Because my job would be to seek and never find
What's the problem about changing error message to something like that?
- 6. Januar 2023
- Offizieller Beitrag
Zitat von roko772
What's the problem about changing error message to something like that
None, post it in github as a feature request
- 6. Januar 2023
Zitat von roko772
I would become a dosimetrist
Never heard that word so, had to search it:
Learned a new thing today, thank you.
Zitat von roko772
if I liked searching
That's the reason why there are pinned topics with the most common situations and their solution to issues that are so recurrent, that the forum is spammed constantly, forcing people (moderators, helpers, etc) to keep saying the same thing over and over.
And, since this is a free software, don't expect that EVERYTHING can be covered.
Bu, as geaves said, you can always ask it on github, and maybe @volker can change this:
openmediavault/guru-meditation.component.html at master · openmediavault/openmediavault (github.com)Code
{{ 'Software Failure. Press left mouse button to continue.' | transloco }}
To maybe this:
Code
{{ 'Software Failure. Refresh browser cache with Ctrl+Shift+R.' | transloco }}
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
Benutzerkonto erstellenAnmelden